ModWright LS 36.5 Tube Linestage with balanced inputs and outputs.

"...Dan could probably rest on laurels for a few years after producing something as good as the 36.5. I could see this line stage emerging as THE preamp for $5000 in the same way that his SWL 9.0 SE is THE preamp for $2500 among those in the know. Take five, Dan, and enjoy that blue LED glow." - Marc Phillips writing for Tone Audio.

"Rather than a refinement of the prior model, it indicates a new platform altogether. Coming a few short years after the 9.0's launch, Dan Wright musta hitched some wild ride on a steep learning curve. This isn't a MkII revision in a gussied-up box to charge a pretty penny for a spin and packaging job. This isn't even a hot-rodded modification. This is a new ball game on an altogether loftier plateau." - Srajan Ebaen, 6Moons.com

AudioCircle / Modwright LS 36.5 Discussion Forum

Please buy from your local Dealer if one is near you. Check the Modwright Dealer Listing for the location of your nearest dealer.

The Modwright LS 36.5 is Modwrights current top of the line preamp/linestage. Beautifully crafted, the LS 36.5 is as beholding to the eyes as it is to the ears. We highly recommend this preamp for anyone seeking the warmth and organic midrange of tubes, without losing the punch or high frequency extension of solid state. This is THE preamp to pair with any Class-D amplifier, something about the Modwright brings out the absolute best in Class-D amplification. We pair ours with the Spectron Musician III SE, and the Nuforce Ref 9 V2 SE. We have special package pricing on either one of these combinations as well. Call for details.

Details:

• (1)set of balanced (XLR) inputs.
• (4)sets of RCA inputs.
• (2)sets of RCA main outputs.
• (1)set of RCA Tape outputs.
• (1)set of balanced (XLR) main outputs.
• Phase control - both on front panel and remote.

Technical Specifications:

• Tube Complement:(2)6H30 driver, (1)5AR4 rectifier.
• Input impedance = 50K
• Output impedance = 110ohm.
• Frequency Response = 20-100Khz (-1dB)
• Noise Level = -125dB
• Dimensions: 17-1/2"W x 12-1/2"D x 4-3/4"H
• Weight: 29lbs. (34 lbs. shipped)
• Full complement of MWI Custom capacitors - designed by ModWright to provide no sonic compromises. Pure Teflon film/foil and oil-impregnated poly caps in power supply and signal path applications.
• Tube-rectified internal power supply.
• 6H30 signal tubes (2) in Teflon tube sockets.
• Brand New MWI Look.
• 4X lower noise floor and improved bandwidth. Completely re-designed tube analog stage to allow for a true 'live' musical presentation.