StereoVox
Cables
>
Digital
>
StereoVox
"...To convey this experience in another way, if I had been blindfolded and asked what had changed in my system I would have probably guessed that someone swapped in a SET amp, time/phase coherent speakers, or a power conditioner. I’m not saying the absolute change in sound was of that magnitude, but many of the positive sonic characteristics generally associated with each of these types of components seemed to be at work through the Stereovox cables..." - Tim Shea, Soundstage
Stereovox Studio Series
The STUDIO line brings Stereovox's legendary performance into pristine reach with a "Performance First" approach that won't break the bank. These products have been tailored to deliver outstanding price-to-performance ratio for music lovers of all pursuasions.
The Stereovox Studio interconnects are built from runs of hollow, tubular copper conductors for signal delivery (microtubes), each one discretely shielded and insulated with a PTFE dialectric. They are terminated to Xhadow Reference RCAs in the ISC method. ISC stands for Intimately Stressed Contact, and it simply means that the signal wire and the connector it is attached to are not only in electrical contact with one another – but that they are contacting one another under extremely high stress. This guarantees that the connection, or “joint,” is a perfect one before any solder is applied. Thereafter, solder is applied to create a hermetic seal – never to act as an electrical bridge between wire and connector.
The "microtube" feature of the Stereovox Studio cable gives the conductor the skin profile of a 32 AWG conductor while maintaining the lower resistance of a larger gauge. This permits the Studio to perform with the agility and grace of thin-conductors without suffering from their high resistance - and yet it is also a monocoque product that won't suffer from problems associated with stranded and "litz" designs that have purported to solve the "skin-depth vs. resistance" challenge.
XV2 - The most well-regarded digital cable JUST GOT BETTER! Stereovox has introduced a special, full-metal foil shield to tighten impedance tolerances and decrease leakage. The result? A pure 75 Ohm GIANT-KILLER while remaining a STONE COLD BARGAIN.
VESPA - Stereovox Vespa is a small interconnect of unusual precision.
COLLIBRI -X - Built from a twin-run of discretely shielded, hollow tubular copper signal conductors. Terminated to Xhadow Reference XLRs in the ISC method.
- Sounstage review
COLLIBRI-R - Single ended version of the COLLIBRI interconnect. Terminated to Xhadow Reference RCA's in the ISC method.
FIREBIRD - These legendary speaker cables employ Stereovox's unique and very successful design concept: Hollow, tubular copper conductors and silver-plated copper micro-filar conductors in a twisted-pair configuration. The result is of the most articulate, nuanced cables in the world.
- Sounstage review
HDJC - Biwire jumpers with a unique dual purpose termination which can be used with both banana and spade terminals.
|