Loading... Please wait..."...Nevertheless, plug the Magic II into the wall then into your preamp, CD player, Turntable front end, FM Tuner, tape deck/recording gear, etc. and be supremely delighted. This is astounding performance for the money. There are very few power line conditioners that approach this level of refinement …very few!..."
"...The new Harmonic Technology Magic II Reference Power Cord with Pure AC Module redefines what is possible when plugging your top equipment directly into the wall AC. Recommended for source gear only or low powered amplifiers, the added clarity and refinement throughout all ranges is astounding and sophisticated. Compared to a range of power cords at price points up to the stratospheric plugged directly into the wall, the Magic II was, at the very least, a bit superior overall. In some cases it was embarrassingly superior! I have never owned a power cord with a computer inside, but it’s time! The new Magic II pushes the envelope once again and is, in my opinion for power cords in this application, the state of the art. Well done Harmonic Technology! ..." - Robert Levi, Positive Feedback
" Even though I did not know I was waiting, the wait for Harmonic Technology's Magic Reference II Special Edition Power Cord with "PureAC Module" was well worth it! The performance was EXCELLENT. Although I have be able to put only about 50 hours of "juice" through it, it has greatly exceeded my expectations after reading your literature.
According to our conversation, I placed the Magic Reference II Special Edition Power cord between my Equi=Tech custom-made power conditioner and my Spectral preamp. The Magic Reference II Special Edition greatly reduced noise levels which resulted, naturally, in appreciably more musical information. There is greater definition across the musical spectrum:
tighter bass with better tone, crash cymbals and high-hats shimmer more, the sounds of drum sticks and brushes on snare drums are crisper and more realistic. And the female voice? Think 3D. Additionally, horns maintain their power without the harshness that one sometimes hears due to noise that gets into the signal stream.
This power cord took my system to a new level. I love it! By the way, this power cord is favorably competitive with power cords that cost a LOT more!"
Harmonic Technology is proud to RE-introduce a new product from the world-renowned Magic Reference Power Cord, with a patent-pending “PureAC module” that contains integrated circuits for a full-band noise filter to purify the AC power source in high-end audio and video components.
The Magic Reference II Special Edition Power cord is unique by filtering both high/low frequency noises as well as noises in the middle frequency range without any interference from the most desired levels of power. The “PureAC module” also filters the most undesirable DC component interference (that may occur) in an AC source. The final touch added to the Magic Reference II Special Edition Power cord is its ability to distinguish and filter all low amplitude noise to deliver the most uncolored and articulate power cord available.
The conductors are 10 AWG single crystal OCC copper Power cord with UL/CL3 and Ethylene Propylene (PE) insulation. The cord can handle upwards of 240 Volts at 20 Amperes. The Harmonic Technology Magic Reference II is not to be used with multiple components or a power distributor as it can handle a continuous load maximum of 800 watts.
Specifications
Conductors: |
Total of 10 AWG |
|
Material: |
Single Crystal OCC Copper Power cord |
|
Insulation: |
UL/CL3 and Ethylene Propylene (PE) insulation |
|
Power Rating |
Used for AC sources between 100 to 240 V |
|
Connectors |
IEC 15 or 20 AMP |
|
Wall plug |
US/UK/EU |
|
Damage threshold |
maximum of 2400 W of peak power or peak current of 20 A at 110V or 10 A at 220V |
|
Constant load |
maximum of 800 W |
|
Note |
The power cord is not designed for with multiple components or a main-line from wall plug to the power distributor if the total current is over the maximum constant load. |