Music Hall Audio

Music Hall 11.3 Turntable

$6,495.00
Shipping calculated at checkout.
Add the Ortofon Cadenza Cartridge?: Yes (add $1500)
Piano Black or Walnut?: Piano Black

Pickup available at Shop location

Usually ready in 2-4 days

Music Hall MMF 11.3 Turntable


Audiophile Turntable


"The combination of the Boston Audio mat and the Lyra Titan kept me happily playing records for more months than Roy Hall probably would have liked. I've had this `table in the system too long!" - Michael Fremer


music hall mmf 11.1 turntable


Reviews

Quadruple Stack, Superb Isolation & Noise Reduction


The Music Hall 11.3 2 speed, belt driven turntable measures 21.3" x 13.8" x 7.8" (WxDxH) and it weighs in at 40 pounds. It is constructed with quadruple stacked Piano Black MDF plinths. Each of the four plinths is separated by compliant disks made of shock absorbing Sorbothane.


The distinctive design isolates the critical sound reproducing components, each on their own plinth. The tonearm is mounted to the upper plinth and the inverted ceramic main bearing is mounted to the second plinth allowing the partially sunken 1 1/2″ acrylic platter to spin freely.


All of this is supported by adjustable, magnetic levitating feet.


mmf 11.1 turntable feet


The Tonearm


The tonearm, like the turntable, are made in the Czech Republic by Pro-ject. During the time Roy Hall was at the Litovel factory he specified their top-of-the-line '9cc Evolution' Carbon Fiber tone arm. The 9" arm is in one piece with a non-removable head shell. The Pro-ject 9cc arm pivots use high-quality Swiss ABEC-7 bearings.


mmf 11.1 turntable


Tips


The 11.3 is ultra smooth and ultra quiet. Placement on a mass loaded base is recommended. Cartridge and mat selection should lean to the, faster, more detailed side. The table is already very smooth


Features

  • music hall's unique quadruple-plinth design w/sorbothane vibration isolation
  • one-piece Project `9cc Evolution' carbon fiber tonearm
  • the arm uses four hardened Swiss ABEC 7 ball races in an inverted bearing design
  • tonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectors
  • counterweight's center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damper
  • fully adjustable azimuth, VTA, and dampened arm lift
  • exclusive microprocessor electronic speed controlled dual motor single flywheel drive system
  • 33 1‚ÅÑ3 and 45 rpm speed change at the touch of button
  • motors and flywheel assembly are isolated on mass loaded resonant sink connected to the lower plinth
  • the dual motor flywheel system sits on the left side of the turntable thus eliminating all motor and belt vibration from the cartridge
  • magnetic-levitation adjustable isolation feet
  • inverted ceramic main bearing for super quiet fluid operation
  • thick acrylic platter
  • removable acrylic dustcover
  • high quality, gold RCA connectors with detachable phono cable
  • low noise fully manual belt-drive design, dustcover, 45rpm adaptor
  • ships securely in a substantial wood box
  • excellent instruction manual and easy assembly

"Undoubtedly the MMF-11.3 is the complete package and well worth the money. I can't find anything that would limit the performance of the very best cartridge or of the best recordings. And for that matter anything at all that might detract from the vinyl state of the art."


music hall mmf 11.1


Specifications

  • speed of turntable: 33 1/3 or 45 r.p.m.
  • change speed electronically, luminous buttons
  • deviation speed < ¬±0.1%
  • variance speed < ¬±0.08%
  • mechanical distance > -45dB
  • electrical distance > -65dB
  • drive silicone belt over pulley
  • motor 2 x synchronous motors; the motor is controlled via microprocessor
  • platter acrylic (11.8 in., 300 mm) weight - (7.4lbs., 3.35 kg)
  • power switching power supply (90 - 246 VAC, 47-63Hz) type EU, UK,USA
  • electric input 23W DC
  • effective arm length 9in. (230 mm)
  • effective arm mass 8.5 g
  • mounting distance 8.3 in (212 mm)
  • overlap .71 in (18 mm)
  • angle crank 24¬∞
  • course zero error angle √∏ 130.5, √∏ 243.7
  • force on the tip 0-3 g
  • plinth material MDF
  • belt material silicone rubber
  • product dimensions 21.3‚Ä≥ x 13.8‚Ä≥ x 7.8‚Ä≥
  • (540 x 350 x 197 mm)
  • 39.5 lbs. (17.9 kg)