Stillpoints Ultra II

Twice the Absorption of the Ultra V2

The Stillpoints Ultra II follows the legacy of the original Ultra 6, incorporating the use of technology pockets on opposing sides of the isolator. This is what differentiates it from the Ultra V2. There are 5 versions available.

NOTE: The Ultra II is NOT recommended for Speakers.

Version 1: Ultra II configured with an LPI pad (smooth pad) on top and 1/4-20 threaded pad at the bottom. This version is recommended for attachment to the ESS X Grid, Rail Grid, or the Component Stand SS for supporting components. No Ultra Base.

Version 2: Ultra II configured with1/4-20 threaded pad at the bottom, smooth pad on top with an Ultra Base (5/8" 1/4-20 set screw included). This version includes an Ultra Base for supporting the Ultra II on a shelf or floor.

Version 3: Ultra II configured with 1/4-20 threaded pads at both top and bottom and an Ultra Base (5/8" 1/4-20 set screw included). This could be affixed to a component via the top pad with an appropriately sized adapter for the component being used.

Version 4: Ultra II configured with 1/4-20 threaded pads at both top and bottom with one Hard Hat with standard 7/16"1/4-20 set screw included. This could be affixed to a component with an appropriately sized adapter for the component being used with the Hard Hat interfacing the shelf or floor.

Version 5: Ultra II configured with 1/4-20 threaded pads at both top and bottom. (This could be affixed to a component via the top pad with an appropriately sized adapter for the component being used and then affixed to the Component Stand SS.)